{click photo to enlarge}

Mechanical Services

Fertilla offers an array of services including precision lathe machining featuring the latest CNC milling and turning centers. With equipment such as the SHARP CNC Vertical Machining Center and the Mori Seiki TL40, we can provide increased efficiency when performing even the most challenging machining processes.

Contact Us for more information on all of our Mechanical Services.

Need Caption
80″ x 360″ Craven Grinder

{click photo to enlarge}

Need Caption
80″ x 360″ Craven Grinder

{click photo to enlarge}


Roll Grinding

80″ x 360″

Fertilla is a comprehensive roll service shop with the expertise and equipment necessary to provide exceptional grinding services to our clients in industries such as paper, non-woven, coating, converting, plastic, steel and roofing. Our roll grinding capacities can handle up to 80“ OD X 360“ Face. We also have an overhead crane with 80,000 lbs. capacity.

Grinding Equipment:
  • (1) Craven Roll Grinder (CNC) – 80″od x 360″ Long
  • (1) Craven Roll Grinder (CNC) – 36″od x 190″ Long
  • (1) SMTW Cylindrical OD Grinder – 24″od x 160″ Long
  • (2) SMTW Cylindrical OD Grinder – 20″od x 120″ Long
  • (1) SMTW Cylindrical OD Grinder – 20″od x 60″ Long
  • (1) SMTW Cylindrical OD Grinder – 20″od x 60″ Long
  • (1) Mattison Surface Grinder – 12″ x 36″ Table
Materials Ground:
  • 52100 Hardened Steel
  • Brass
  • Chilled Cast Iron
  • Ceramic
  • Chrome
  • D2 Hardened Steel
  • Stainless Steel
  • Steel
  • Tungsten
  • Carbide
  • Rubber
Standard Roll Tolerances:
  • TIR: .001
  • Straightness: .001
  • Station Deviation: .001
  • Station-to-Station Dev.: .001
  • Concentricity: .001
  • Surface Finish: 16 – 32 Ra

Precision tolerances of .0002 or less are also available.

Contact Us for more information on our Roll Grinding services.

Need Caption
Proper balancing ensures optimal performance.

{click photo to enlarge}


Roll Balancing

80,000 lbs. / 84″ x 400″

Fertilla  offers dynamic balancing of a wide range of rolls and rotation equipment in the industries we serve. Our balancing capacity is 84 OD x 400” in length and a 80,000 lb. load. Our variety of set-ups allow for balancing on existing shaft surfaces or use mounted bearings on the shaft for support. Also, our optical whip indicator allows us to correct whip imbalance when necessary on high speed rolls.

Contact Us for more information on our Roll Balancing services.

Need Caption
Indicating at large chuck.

{click photo to enlarge}


Large Lathe

112″ x 960″

Fertilla has extensive lathe capabilities. Fertilla currently has two CNC lathes and five engine lathes. We specialize in close tolerance turning and deep boring.

Lathe Equipment:

CNC

  • (2) Mori Seiki TL40 – 16″od x 116″ lg.

Engine

  • (1) Niles – 112″od x 960″ Long
  • (1) LeBlond – 64″od x 360″ Long
  • (1) LeBlond – 48″od x 360″ Long
  • (1) Summit – 30″ x 190″ Long
  • (1) Monarch – 12″od x 120″ Long

Contact Us for more information on our Large Lathe services.

Need Caption
State of the art equipment – Sharp CNC Vertical Machining Center.

{click photo to enlarge}


CNC Milling & Turning

Fertilla offers an array of services including precision lathe machining featuring the latest CNC milling and turning centers. With equipment such as the SHARP CNC Vertical Machining Center and the Mori Seiki TL40, we can provide increased efficiency when performing even the most challenging machining processes.

Our use of innovative CNC milling and turning equipment enables us to provide a number of services and benefits to our customers. Through our expansive equipment, we are able to perform complicated CNC turning and milling operations with speed and accuracy. We can reduce downtime and exceed your performance expectations. The high efficiency offered by Fertilla also reduces the overall cost of the machining process.

Contact Us for more information on our CNC Milling services.

Need Caption
Our expansive equipment provides unlimited service capabilities.

{click photo to enlarge}


Equipment List

  • Balancer – 84” od x 400” long
  • Lathe
    • CNC
      • (2) Mori Seiki TL40 – 16″od x 116″ lg.
    • Engine
      • Niles – 112″od x 960″ Long
      • LeBlond – 64″od x 360″ Long
      • LeBlond – 48″od x 360″ Long
      • Summit – 30″ x 190″ Long
      • Monarch – 12″od x 120″ Long
    • Mill
      • CNC
        • Sharp SVG 5127 – 57” X 29” Table
      • Manual
        • 4″ G & L Boring Mill
        • Gray Planner Mill – 36″ x 48″ x 24ft
        • Bridgeport – Series I Mill
        • Bridgeport – Series II Mill
      • Grinder
        • Craven Roll Grinder (CNC) – 80″od x 360″ Long
        • Craven Roll Grinder (CNC) – 36″od x 190″ Long
        • SMTW Cylindrical OD Grinder – 24″od x 160″ Long
        • SMTW Cylindrical OD Grinder – 20″od x 120″ Long
        • SMTW Cylindrical OD Grinder – 20″od x 60″ Long
        • SMTW Cylindrical OD Grinder – 20″od x 60″ Long
        • Mattison Surface Grinder – 12″ x 36″ Table
      • Crane (40 ton)
        • (qty. 2) 20 Ton Bridge Crane
        • 10 Ton Bridge Crane
        • 1 Ton Jib Crane

Contact Us for more information on our Equipment List.